Access Controls Drop Arm Turnstile,Baffle Gate Electronic Barrier
Intelligent parking control system drop arm barrier
Features and functions:
1. Fault detection and alarm functions, easy to use and
2. The running status can be programmed and controlled with the
built-in keyboard on the main board.
3. Mechanical anti-pinch function. If the gate meets resistance in
the reset process, motors will stop working automatically within
the prescribed time and reset again after the default delay (till
4. Anti-breakthrough function. The arms are locked automatically
until opening signal received.
5. Synchronization functions (for dual gate equipments).
6. Automatic reset function. Should the user fail to pass within
the prescribed time (default time is 5 seconds), the system will
cancel the authority of the current user automatically.
7. Passage can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers,
bar codes, fingerprints, etc. (Access controller needed)
9. Direction can be set as single-direction or bi-direction.
10. LED direction indicator.
11. Arms auto drop when power off and auto rise when power on,
complying with fire safety requirements.
12. Alarm function, in case of illegal intrusion and reverse
13. Counter function (optional).
14. Support infrared photocell for anti-pinch and reset function
|Model Item||RS 1009|
|Voltage||AC 220V/110V± 10%|
|Working temperature||-20° C~60° C|
Self-inspection of fault and alarm indication function, convenient
for maintenance and usage.
The rod is automatic fall when power is off and self-inspection
when the electricity is on and automatic recovery to the locked
Various kinds of working modes which can be optional, such as
bi-directional card reader; Read card at one side while forbidden
passing on the opposite side; Read card at one side while allow
passing on other side; Passing through infrared sensor in single
and bi-directional way, the rod will be lifted and fall the gate
will be closed when detected the person is passed. And the working
mode of gate is setting through main menu.
The infrared sensor detected the pedestrian who read valid card has
passed, it will be lifted the rod and closed the gate automatically
or delay lift and fall after the pedestrian has passed, able to
delayed 1~60 seconds which can be set through the main menu.
Able to reset automatically. If the pedestrian read the card but
did not pass in the specified time, the system will be cancelled
the passing rights of this time. The limited time of passing can be
set by administrator.
If pedestrian forgot or read invalid CAD, forbidden to pass and
alarm till the pedestrian quit the channel of turnstile. Allow
passing after re-read valid card.
In order to meet clients' special requirement and fire safety
requirement, the port of communicate interface 485 can be
controlled the lifting and falling of rod at long distance.
Prevent rush function, the rod of the gate will be locked when it
hasn't got the open signal.
Double anti-pinch function infrared sensor and machine.
Unified and Standard external electric interface can be connected
with various kinds of read and write device, convenient for system
integration, and able to accomplished remote control through
Able to statistics the numbers of pedestrian on passing direction,
and show it to the administrator as the manner of LED (optional)
Memory card reader and non-memory card reader, user can be set
according to their own needs.
Able to limit the numbers of the inner worker through setting the
software, to meet some special requirements in special place.
Operating smoothly, low noise.
Apply to control flow of single or bi-directional entrance and exit
The entrance and exit channel of station, pier and tourist
The ticket checking channel of exhibition, swimming stadium.
Access control of entrance and exit channel of office buildings,
Able to control special channel.
1. One year warranty; life-time professional technical supports
2. Support customized turnstile gates or OEM
3. One-stop access control/ security solution provider, can help
you save time and costs
4. Good quality with competitive price
5. Fast delivery, well-protective package and safe shipping way
1. Guarantee & after sale service?
Strictly quality testing before shipment and 1 year quality
Equipped with well-trained professional R&D engineers and sales
to provide you timely help.
2. Lead time?
For standard item
10-50 sets:5 working days
0-100 sets:7-10 working days
200-500 sets:10-15 working days
For customized item or package , 3-10 working days longer
3. Payment terms?
TT , Western Union, Paypal, L/C, Cash are available.
For sample, usually delivery by air or by express, takes about 3-5
For quantity purchase with big volume and heavy duty, normally by
sea, you can choose your own forwarder. Takes about 10-60 days
depends on different countries.
Standard carton box, better pack it by wooden case to protect the
6. OEM service available?
Yes, we can offer OEM services as follows:
1) Customize design according to your requirements is acceptable.
2) Print your logo on goods, and customize retail box packing and
other things. Large amount logo print is for free.